Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:16 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:60954628
Read more Sopoby 400PCS Solder Seal Heat Shrink Wire Connectors ------ Provide You with Qualified Terminals & Meet Your Needs In A Variety of Wiring Projects Whether you are working on your boat, vehicle, home or scientific project, our heat shrink solder and seal connectors will ensure solid soldering, increased current flow and weatherproof connections every time~ Features: ● Shrinkage Ratio 2:1 ● An easy One-Step Wire Connections. ● Easy Identification: Color coded connector tubing. ● Polyolefin heat shrink butt connectors improve Pullout Strength. ● High-quality wire connectors in Seal, Strain Relief, Cable Check and Insulation. ● Melted Solder ensures wires Strongly Connected and avoids wires slipping out from the terminal. ● Comply with all Relevant Standards: ROHS, ISO 9001:2008, SGS and CE standards. Package Included: ● 1×400 PCS Heat Shrink Solder Connectors (Four Sizes/Colors) IP67 Waterproof ● The design that Polyolefin Tubing outside and Hot Melt Adhesive inside creates a durable waterproof seal between the wire and the connector. ● Waterproof Connectors would prevent any corrosion even in the most humid environments. ● Transparent Sleeve of the butt connectors provide Visual Inspection. --- You can control the operating temperature and heating time. Read more No Crimping Required ● Sopoby solder and seal butt connectors allow you to use them in hard to reach or limited space environments. As no crimping needed, what you should do is just position the stripped wires into the solder sleeve and apply heat to finish the connection. An easy one step connection of wires, insulated and sealed. ● Any further questions, just feel free to let us seller know. We would try our best to assist you and meet your satisfaction. Thanks a lot. ^_^ Read more
♥ 【Package】 - 400PCS (150 Red, 150 Blue, 60 White, 40 Yellow). Dual-walled Design: Polyolefin tubing outside and hot melt rings inside effectively improve waterproof performance and prevent wire corrosion.
♥ 【Easy To Use】 - Shrink Ratio 2:1. NO Crimping Needed. Transparent sleeve provides precise inspection when strip and insert wires inside. Color-coded tubing makes it easy for you to pick up for use.
♥ 【Durable Connection】 - Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding. Your wire will never slip out of the connector.
♥ 【Wide Applications】 - Ideal used for vehicle, motorcycle, boat, DIY electrical wirings and other outdoor applications. Sopoby Solder Connector Kit compliants with ROHS, ISO 9001:2008, SGS and CE standards.
♥ 【Quality Guarantee】 - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us Sopoby if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction :)
These work very well. Saves alot of time on your electronics or electrical jobs.These solder wire connectors are so handy and easy to use. It took a bit of practice. I think we ruined two of them before we figure it out. You slip your wires in like you would any connector (I like to overlap a bit in the middle), then you heat the connector focussing mainly on the middle first, where the solder is. You can heat it by your own preference but I used a lighter, be careful and use caution to not completely scorch the connector. Here's the important part: have a set of needle nose pliers ready because you will need to gently press the part that has the solder immediately after heating to ensure that the solder completely seals the wires together. Then you can continue to heat the ends to snug up the rest of the connector on the sheathed wire. I don't test it until it has completely cooled. Made the mistake the first time of pulling on the wires to see if it was going to hold and it all came apart. I also did not use the needle nose pliers the first time either. After figuring out how to use them we have used several of them now as we are in the middle of rebuilding a car and there were many places to use these, we have decided that these are the best thing since sliced bread. Love them. Highly recommend them. What's really nice is that you have a clean finished look that does not require electrical tape or other mess looking methods. These look neat, clean, and hold extremely well.Works kinda good. I’d probably recommend shrink tubes with these, like another reviewer said. I used a heat gun and you have to heat it up pretty good to get the solder to melt in the middle. Which in turn almost starts to melt the plastic tube. And if you have the spliced wires against the plastic tube. It seems like they almost poke through the plastic tube. Given I was under a semi trailer trying to solder the wires together. It’s hard to hold 2 wires straight across from each other in the air with a heat gun in the other hand. I just feel like shrink tubes would be more assurance and clean up real good. I suppose if you were working on a work bench, the connectors by themselves would be fineGreat idea, but needs improvement. The shrinkable material is too thin. By the time the solder melts, the plastic has melted too much. Also, you cannot hold the wires and connector in your hand, you must put them on a solid surface to hold everything in place until it cools. Otherwise when things start to melt, you wind up with a mess. Get the wires in the right position and hold them firm against the solid surface, then use the heat gun. I'm sure there is some combination of heat level, distance from gun, etc., that will make a satisfactory result, but I have not found it. I have used low setting up close, high setting up close and farther away. Either the solder doesn't melt or the plastic melts too much. I have had a couple of successful tries, but five failures for each success. If the plastic was thicker, these would be great. I got these for wiring on my boat, with means that most connections are made in an area too tight to provide the needed solid (non-flammable) surface on which to hold everything in place while heating and cooling. I have reverted to the crimp style shrink connectors for the boat work. Great idea, but needs improvement.First time dealing with these and they worked out great for meI needed them for a task but bought plenty to use in my hobbies with my motorcycle and LED lighting... I was not prepared with a heat gun so I tried using a lighter, not very successful. Once I got the heat gun they worked great and I look forward to using them on other projects!!!I've use this product before these are really great very easy to useThese worked well once I figured out how to shrink them. I tried a soldering iron but that melted them, and a hair dryer didn't affect them at all. Finally just used a lighter and they shrank just fine. It's rained a couple times since I used these and have not had any problems.
